Designed and manufactured to test the efficiency of the helmet retention systems in compliance with BSI regulations and other standards. Operated by either Cadex software or touchscreen controller.
Features:
- Manual system
- Electronic conditioner box reads displacement over time during the test
- Adjustable headform support can be raised or lowered up to 10 inches (25.4 cm)
- Powered by 115VAC/60Hz or 220VAC/50Hz source
- Can be connected to a computer system in order to measure the real time displacement with the Cadex software
*Headform not included and sold separately
Dimensions (Approx.):
- Length: 48.26 cm / 19 in
- Width: 81.28 cm / 32 in
- Height: 176.53 cm / 69.5 in (minimum height – without headform)
![Adjustable headform support with helmet](https://www.cadexinc.com/wp-content/uploads/2023/07/dynamic-retention-BSI_rear-Adjustable-headform-1.webp)
![Adjustable headform support without helmet](https://www.cadexinc.com/wp-content/uploads/2023/07/dynamic-retention-BSI_rear-Adjustable-headform-support.webp)
![Rear view](https://www.cadexinc.com/wp-content/uploads/2023/07/dynamic-retention-BSI_rear-view.webp)
![](https://www.cadexinc.com/wp-content/uploads/2023/07/dynamic-retention-BSI_main.webp)