Designed and manufactured to test the efficiency of the helmet retention systems compliance with ECE 22, EN 1078, ASTM, CPSC, AS/NZS, SNELL and other regulations and standards. Operated by either Cadex software or touchscreen controller.
Features:
- Manual system
- Electronic conditioner box reads displacement over time during the test
- Adjustable headform support can be raised or lowered up to 10 inches (25.4 cm)
- Powered by 115VAC/60Hz or 220VAC/50Hz source
- Can be connected to a computer system in order to measure the real time displacement with the Cadex software
*Headform not included and sold separately
Dimensions (Approx.):
- Length: 48.26 cm / 19 in
- Width: 81.28 cm / 32 in
- Height: 203.2 cm / 80 in (minimum height – without headform)
![Additional weight to perform more than one standard](https://www.cadexinc.com/wp-content/uploads/2023/07/Dynamic-Retention-System-ASTM_Additional-weight.webp)
![Electronic conditioner box](https://www.cadexinc.com/wp-content/uploads/2023/07/Dynamic-Retention-System-ASTM_Electronic_conditioner_box-1.webp)
![ASTM](https://www.cadexinc.com/wp-content/uploads/2023/07/Dynamic-Strap-Machine_ASTM.webp)
![ECE / EN 1077](https://www.cadexinc.com/wp-content/uploads/2023/07/Dynamic-Strap-Machine_ECE-EN-1077.webp)
![Drop platform - EN 1077](https://www.cadexinc.com/wp-content/uploads/2023/07/Dynamic-Strap-Machine_Drop-platform.webp)
![](https://www.cadexinc.com/wp-content/uploads/2023/07/Dynamic-Strap-Machine_main.webp)